Satellite Decoder


Intergrated Trans Decoder

Satellite ITD(Intergrated Trans Decoder) is a high-quality equipment which receives QPSK digital satellite broadcasting signal and then demodulates it into transport stream signal. It is transcoding from audio format of MPEG-1 layer-ll of QPSK to audio format of Dolby Digital AC-3 of 8-VSB. After that, it converts from digital to digital and directly transmits TS(DVB-ASI) signal without quality deterioration.

* Audio transcoding MPEG-1 layer II  to Dolby Digital AC-3
* Simultaneous support of Dolby Digital AC-3,
  MPEG-1 layer II
* ASI/SD-SDI Digital output
* Simultaneous transmission of digital and analog
  broadcasting (Option)
* Easy to use front panel display
  · Variable input channel frequency
  · Packet format, Symbol rate, Bit rate setting
* Ethernet SNMP for NMS
* 1RU, Standard 19” rack mount type
RF Input Frequency Range 950~2,150 MHz
Max Input Channel 1 CH
Input Level -65 ~ -25 dBm
Impedance 75 Ω
Symbol Rate 1~45 Mbps
TS Output Transport Stream DVB-ASI
Connector BNC (75Ω)
Video Format MPEG-2
Audio Format Dolby Digital AC-3 & MPEG-1 Layer II
Packet Format 188/204Byte
Bit Rate 1~15 Mbps
Output Level 800 mVp-p

SDI Output


Video / Audio SDI
Output Level 800 ± 10 mVp-p
Connector BNC (75Ω)
Analog RF Output (Option) Frequency Range 54 ~ 870 MHz
Impedance 75 Ω
Output Level 55 ± 5 dBmV
Voice Carrier Level -16 dB
Level Control Range 0 ~ -15 dB
Frequency Tolerance ≤ ±3 KHz
Spurious ≤ -60 dB
Return Loss ≥ 18 dB
Hum Modulation ≤ -63 dB
Ethernet Connector RJ-45
Interface Type 10/100 Base-T
Protocols SNMP
General Power Requirements AC 90~230V, 60Hz
Power Consumption Max. 45 W
Weight 3.6 Kg
Dimensions (W x H x D) 482 x 44 x 337 mm